Drawers for shelf, by Martin

I built the shelf from leftovers and a few things I bought from the hardware store, and the boards for the drawers were ordered to measure from TOSIZE. The dimensions of the wood (multiplex interior poplar 12+18mm) were cut exactly and could be used without any further processing. The quality of the wood was (as expected/desired) mediocre (poplar) but sufficient for the purpose. Two boards were "patched" with filler. But it didn't bother me. I saved almost 50 euros at the hardware store around the corner and the process went smoothly. All in all, I can recommend TOSIZE and will certainly use it again. Many thanks and a good start to the new year 2022 to everyone

- first everything was measured and marked- then the panels were placed together and clamped using a 90 degree gauge.- then holes were drilled or pre-drilled from the side from which the screws were screwed- then the panels were loosened again- then the connections were additionally provided with wood glue- then the panels were reconnected- then the pre-drilled holes were re-drilled along the entire length of the side wall panels in the screwing direction- finally everything was screwed togetherFirst the frame / then the floor / the whole thing four timesFINISHED

700x400x400700x400x200700x400x150700x400x100